Home > Unpainted Wood Lure Bodies > Musky / Pike Bodies >

Large 6.0" inch wood Musky & Surf Fishing lure blank | through hole / belly hole & eye sockets
Large 6.0" inch wood Musky & Surf Fishing lure blank | through / belly hole & eye socket
Large 6.0" inch wood Musky & Surf Fishing lure blank | through hole / belly hole & eye sockets


 
Alternative Views:


Large 6.0" inch wood Musky & Surf Fishing lure blank | through hole / belly hole & eye sockets
Our Price Per Piece: $5.15

Price with Selected Options: $5.15


Item Code: MSKY0063

Coating

Sealer Coat:
Water Proof Sealer Coating. Protects wood and enhances paint finish

Lure Hole Options:
Tail Weight Ballast Cavity

Qty:  
Description Technical Specs
 

Large 6.0" inch (approximate) custom made unpainted wood Musky / Surf fishing lure bodies with through hole, belly hole and eye sockets

Precision Turned and hand surfaced, wooden fishing lure body.
Sanded to a very smooth finish.


A Cigar shaped lure with just the right size lure for most Musky / Pike and Surf Fishing.
Excellent as a top water walk-the-dog lure. Just add some tail weight as needed to make it sit somewhat vertically nose up, between 25~45 degree angle.
(or) Add weight hole just behind belly and insert a 3/8"Oz ballast to make it a glide bait which floats the lure horizantal at rest.
Other variations for glide bait:
Add weight on the underside of the lure just ahead of the belly hole and another weight at 1.5" from the tail/rear end.
Modify as per your situation.


Specs:

Length : 6.0" inches (approx) nose to tail.
Height / Thickness: Top side to Bottom belly 1.2" (inch) approx.

Weight: 1.7 oz approximate

Hole/Sockets:
Nose to Tail Through hole
Hook Hanger Belly hole
1/2" Eye sockets

Optional Tail Weight Cavity :
Two cavities towards the tail end for adding ballast weight
Enables walk-the-dog action, see pictures for location

Optional Sealer Coat :
A sealer coat on the turned wood adds water resistance, smooth texture, reduces paint absorption and makes better paint finish.

Wood: Made from a fine grain, light weight, maple colored ivory wood.
Is light, buoyant and strong to withstand big fish.
Easy to drill. Add ballast weight for buoyancy adjustment.
Excellent for making custom topwater and tail weighted baits


Finishing the lure is now simpler with the included through hole, eye sockets and belly hole
Add the required amount of weighting where needed
Dip in a sealer and once dried, add some paint, affix 3D eyes you want and a final clear coat
Install the through wire and required hardware and now you have a great custom bait.


Recommended Optional Hardware / Grommets:
Tail Grommets: 0.425" OD
Belly Grommets: 0.273" OD
Nose Grommets: 0.152" OD

Through wire: 0.063" OD or 0.051" OD

Eyes: 7/16" OD

Hooks: 3/0 or 2/0 depending on the target species and may vary slightly
Split Rings: #6
Swivels: size #3 (test 64lbs)
Note: If using larger swivels for added strength, size #1 (69 lbs) or size #2/0 (125lbs), then you need to pinch one of the swivel ends slightly with a plier so it can fit through the belly grommet.

Wood: Made using Red Cedar timber. Highly buoyant and light weight makes it easy to cast long. Easy to drill. Add ballast weight for buoyancy adjustment. Excellent for making custom topwater and weighted sinking baits.

Features
  • Fine grain, light weight timber
    Excellent as a Musky / Surf Fishing lure
    Pre-drilled through hole, belly hole and eye sockets for quick build
    Excellent as a top water tail weighted lure

Share your knowledge of this product. Be the first to write a review »